[GSoC 2017 with RTEMS: Phase 1 Last week] Summarizing Phase 1 results

The purpose of this article (as always with GSoC articles) is to review the current state of the GSoC Project: "Utilizing full power of RISC-V architecture via usage of RTEMS on top of SiFive FE310 processors". Further you will see what was done during this week, during the Phase 1 and what are the plans for the next week. Also, we will see how to compile RTEMS BSP for HiFive1 board in its current state.

[GSoC 2017 with RTEMS: Week #0] Building a simple binary for HiFive1 Board

The purpose of this article is to review the current state of the GSoC Project: "Utilizing full power of RISC-V architecture via usage of RTEMS on top of SiFive FE310 processors". Further you will see what was done during this week and what are the plans for the next week.

[Week before GSoC 2017: RTEMS for HiFive1] Building toolchain, simulator and learning ISA

The purpose of this article is to show how to build RISCV simulator. 

Investigation of possibility to create an open LLVM-based Ada compiler [rejected]

This is a closed project. The purpose of this post was to collect as much as possible information about LLVM, Ada compilers and possible people to contact and organizations who can provide some help.

[PreGSoC 2017] Make a port of RTEMS for HiFive1

The purpose of this post is to provide all available sources of information for everyone who is interested in my GSoC 2017 project "Utilizing full power from HiFive1 via usage of RTEMS on top of Freedom E310-G000 cores". Also, in this post other things will be described, such as the current state, available repositories and toolchains, plans for further involvement. 

First steps with stm32l152. SPI handling with LCD 5110 display.

One of the most interesting parts of embedded programming is a work with graphic displays. Some of them are easy to manage, others require special tricks. The objective of this post is to show how to use the simplest and famous display – Nokia 5110 LCD. Also, it will be demonstrated how to use SPI in an unidirectional master mode.

First steps with stm32l152. Uart handling.

The purpose of this introductory post is to show how to receive data via Uart from a host machine. Also, I will see how to create a simple FreeRTOS task.